Wednesday, 13 May 2009
Grog (clay)
I want to introduct something about Neoprene CD Bag / Case / Holder. Neoprene CD Bag Features:Made of high quality neoprene Welcome customer's designs and branding Bright color and comfortable hand feel Colour available: Red, Black, Blue, Yellow etc. Nylon zipper closure and delicate sewing Outer packing: 100pcs/ctn Package size: 31 x 31 x 52cm Neoprene CD Bag / Case / Holder mo Grog, also known as firesand and chamotte, is a ceramic raw material. It has high percentage of silica and alumina. It can be produced by firing selected fire clays to high temperature before grinding and screening to specific particle sizes. It can also be produced from pitchers. The particle size distribution is generally coarser in size than the other raw materials used to prepare clay bodies. It tends to be porous and have low density. It is available as a powder, mortar, or in the form of fire bricks.Contents1 Properties 2 Applications 3 References 3.1 Notes 3.2 Bibliography // PropertiesGrog is composed of: 40% minimum alumina (Al2O3), 30% minimum silica (SiO2), 4% maximum Iron(III) oxide (Fe2)3), and 2% maximum of calcium oxide (CaO) and magnesium oxide (MgO) combined.Its melting point is approximately 1,780 (3,240). Its water absorption is 7% maximum. Its thermal expansion coefficient is 5.2mm/m and thermal conductivity is 69.5W/(m). It is also not easily wetted by steel.ApplicationsGrog is used in pottery and sculpture to add a gritty, rustic texture called "tooth"; it also reduces shrinkage and aids even drying. This prevents defects such as cracking, crow feet patterning, and lamination. The coarse particles open the green clay body to allow gases to escape. It also adds structural strength to hand-built and thrown pottery during shaping although it can diminish fired strength.Other uses for grog is processing ZnO Metal Oxide Varistor (MOV). It is put at the base of the "blocks" on the topside of the bottom of a refractory sagger to keep the blocks from sticking to the sagger. This is because ZnO MOV has a polymer binder that upon drying acts as a glue. The grog at the base prevents gluing and acts as a vent for carbon gases while drying and sintering. The grog is a gritty form of ZnO to prevent contamination.ReferencesNotes^ a b Jain 2003, p.82. BibliographyJain, P. L. (2003), Principles of Foundry Technology (4th, revised ed.), Tata McGraw-Hill, ISBN 9780070447608, http://books.google.com/books?id=k1slD5MmhUMC. Categories: Ceramic materials Refractory materials Silicates(and so on) To get More information , you can visit some products about metal pin, car audio antenna, . The Neoprene CD Bag / Case / Holder products should be show more here!
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment